Beating Casino presents: How to Count Cards without Being Detected
blackjack players know that casinos frown on counting cards and will ask those players
to stay away from their blackjack games if they suspect those players are too skilled.
Sometimes, they'll even ask the players to leave their casino and never return.
Counting cards is not that hard at all and anyone can master this skill with enough practice.
Yet, the casinos will look for those counters using their surveillance systems, including
the eye in the sky, which is the camera located above the blackjack tables.
So, how can you still count cards in blackjack without being caught?
In this video, we will share with you some tips and tricks on counting cards without
getting caught, but the irony is, that if you're too good at counting cards, you'll
eventually get caught.
So, let's begin Get Really Good at Counting Cards
The eye in the sky isn't going to spot you moving your lips while you're counting cards.
It's also not going to see how furrowed your brow gets when you're concentrating.
It won't even see how closely you're watching the cards as they come off the deck.
But your problem is the dealer, because he'll notice all of that and more, and if the dealer
doesn't notice it, then the pit boss might.
What you should do, is practice counting enough at home that you're able to maintain an
accurate count without doing any of the gestures we've just mentioned.
You should, in fact, look like you're completely relaxed and enjoying the game.
It's even better if you look like you're only half paying attention.
A good advice for new card counters is to practice at the kitchen table until you are
able to count through an entire deck accurately, one card at a time.
Then move up to 2 cards at a time.
Once you get really fast, turn the radio on while you're counting.
Then, turn both the radio and the television on while you're counting.
If you have kids, give them some toys to play with, the ones that make noise, and encourage
them to play on the kitchen floor while you count through a deck.
Your goal is to be able to count cards and at the same time maintain a relaxed, calm
exterior.
The only way to count cards without looking like you're counting cards is to practice
and over-practice until it really is effortless.
Change Where and When You Play In his book, Sklansky Talks Blackjack, David
Sklansky suggests limiting your play at any given casino to a 45 minutes to one-hour session
at most.
But there's more to covering your tracks than that.
You should also never play at the same casino 2 days in a row.
You should preferably keep a gap of 2 days or so between your visits at a specific casino.
Most casinos are open 24 hours.
There's a day shift, a night shift, and a graveyard shift.
If you decide to go to the same casino 3 times, you should go there during each of those shifts
at least once.
This alone will go a long way toward avoiding detection because you won't be there long
enough in order to be noticed.
Watch the Sizes of Your Bet You'll find plenty of advice about how to
range your bets from 1 to 4 units or from 1 to 6 units based on the count, and that's
great, but that's also one of the easiest ways to get caught.
The dealers often know how to count cards and the pit bosses almost always know how
to count cards.
That is why they will recognize when a player raises his bet according to the count.
You should play the role of a superstitious gambler who increases the size of his bet
when he's feeling hot.
This means doubling the size of your bet after a win.
You can even double it again after a second win if the count makes it a smart move.
If the count is positive, but you just lost a hand, don't raise the size of your bet
and don't be so accurate about raising the size of your bet based on the count.
You can even mention that you want to capitalize on your hot streak.
Most card counters aren't superstitious, and the casinos know this.
Tip the dealers and waitresses Most card counters don't tip because it
interferes with their already low edge.
But, if you can remain profitable by occasionally placing a bet on behalf of the dealer, you
can look like less of a card counter.
Never just throw the dealer a tip.
Always wait until the deck is positive, then place a second bet on behalf of the dealer.
Not only will the dealer make more money if you win, but he'll also benefit from the
count being positive.
A blackjack pays off 3 to 2 on a bet you've made on his behalf, too.
You might also enjoy a cocktail or two from the cocktail waitress.
Not everyone can handle their liquor well enough to count cards while they've been
drinking, but for most people, this is a matter of practicing and over-practicing.
When you enjoy the cocktails, be sure to tip the waitress.
You can start off with a large tip for the dealer and a large tip for the waitress.
Then, scale back on future tips.
For example, you can tip a cocktail waitress with $5 the first time she brings you a drink
and then scale back to the usual dollar or two.
This will gain you a sort of camouflage for your advantage play.
Don't Sit at Third Base and Don't Wear a Cap
Casinos know that card counters are more likely to sit at third base and also that they're
more likely to wear a ballcap.
If you're sitting at third base, you get to see more cards before playing your hand.
If you're one of those card counters who adjusts his basic strategy decisions based
on the count, you'll have more information with which to make your decisions.
With a lot of players at the table, this can make a significant difference in your edge.
Also, card counters often wear ballcaps as part of their disguises, but since it's
such a common thing, it's more of a tell than anything else.
If you do want some sort of disguise, experiment by growing your beard or a mustache or by
shaving your beard or mustache.
You can also try shaving your head or letting your hair grow long.
Dyeing your hair is also an option.
If you have recognizable tattoos on your arms, wear long sleeves.
If you don't have tattoos, consider getting temporary tattoos as part of your disguise.
Also, try different color schemes with your clothes.
Dress up or dress down.
Consider wearing cowboy clothes or dressing like a biker.
You can disguise your looks in any of a hundred different ways.
Just remember not to wear a ballcap.
On the other hand, a cowboy hat is an option you can consider.
Make Some Basic Strategy Mistakes This is probably the only time not follow
basic strategy, which is more than encouraged during blackjack play.
Here are some examples to basic strategy mistakes you should do during your play:
Stand anytime you have a 16 vs a dealer 10.
Never hit a soft 18 when the dealer has a 9, 10, or ace showing.
Always take insurance.
Not only do these not cost you much in terms of expectation, but if the count is positive,
these plays actually make better sense than the standard basic strategy.
Keep in mind, though, that deviations from basic strategy that aren't related to the
count hurt your expectation.
This has two effects.
It increases your volatility, making it more likely that you'll lose money in a given
session, week, month, or season.
It reduces your return on investment.
To count cards, you need a bankroll.
If you can't see a return on investment better than you'd get through most investment
vehicles, you're better off investing your money.
Work with a Team If you've seen the movie 21, you're probably
at least superficially aware of how a blackjack team works.
You share a common bankroll, but you also share in the profits.
One way they avoid detection is to having several players sit down at several different
tables, one per table.
These players play perfect basic strategy and flat-bet the minimum at each table, but
they count cards while they're playing.
When the count is really high at one of the tables, they signal the "big player."
That player comes in during the shoe while the count is high and places a large bet or
a series of large bets.
Other blackjack teams might use spotters who watch the action from behind the table.
Since they have no money in action, they don't lose any money while they're counting.
How you signal the big player is up to you and your team, but Kevin Blackwood suggests
verbal signals rather than hand gestures.
That is because gestures are recorded.
However, with enough attention, even the most subtle gestures can eventually be detected.
In the long run, that's bad news for a card counting team.
You have several choices for how to handle the financing of such a team.
You might have one big investor who also plays as the big player, or you might have several
investors, each of whom contributes to the team's overall bankroll.
These investors might or might not actually play on the team.
It's customary when dealing with a gambling team that has an investor to split the profits
50/50 between the players and the investors.
The biggest advantage of forming a blackjack team is the ability to increase the amount
of money you can put into action.
With a positive expectation, this corresponds to an increase in the amount of winnings during
a given session or series of sessions.
When you're part of a blackjack team, you get to enjoy some of that camaraderie along
with an edge over the house, which is an intoxicating combination, for sure.
If you decide to go this route, it's important to meet with your team and write down the
expectations of the team and its members.
Someone needs to manage the team and the accounts.
The role that each member plays should be clear to everyone.
You also need to decide as a group on some of the playing decisions that face you in
the casino.
How long will sessions last?
Does the team ever tip the dealer and so on.
The best approach to managing a blackjack team is to treat it as a business.
If you have no stomach for operating a small business, a blackjack team probably isn't
the way to go.
Conclusion A major concern for every card counter in
blackjack is to avoid getting caught.
If you get barred from enough casinos, you can't make any money from blackjack.
Like mentioning earlier, tipping is one way to camouflage your advantage play, but tipping
also subtracts from your expected value.
Making basic strategy mistakes on purpose is another way to provide cover, but that
has a cost also.
So, perhaps the best way to avoid being detected as a card counter is to adopt a simple hit-and-run
strategy where you just don't play blackjack at any one table at any one casino long enough
to be detected.
Playing for 45 minutes at a single casino 3 times a week is a great strategy and plan
in order to avoid being detected as a card counter.
Thank you for watching.
Enjoy our channel with more videos, tips and strategies on how to beat the casino both
live and online, and don't forget to like, share, and comment on our videos.
Also, check our amazing promotions waiting just for you in the description section below,
for free cash, no deposit bonuses and other great promotions you can claim right now on
the leading casino rooms online.
Have a great day and go start your practicing.
For more infomation >> How to Count Cards without Being Detected - Duration: 10:58.-------------------------------------------
How to Make Lassi ft. Radhika | Yummy Yummy Recipes | Baal Gopal - Powered By Madhavas - Duration: 11:25.
today we are going to be making rose laci
but this we will be needing yogurt
sugar, rose water, water
uhh this is a big rose that has been put in cold water for
half an hour and let's move on to our
first step as you've seen of added
yogurt and rose petals in our blender
and now I'm gonna add some sugar, some rose water and a bit more water.
You forgot to say it's brown sugar. Yes and don't forget to
leave some petals for garnishing.
so I'm gonna just gonna close. It's a very easy recipe.
So are you ready to rock n roll? Yes so let's just blend this.
so just like that our Rose Laci is ready.
this
I'm gonna garnish it with some rose petals.
And wow, look at our Laci
yay so we're going to offer this to our Takuji
and enjoy our blessing. Hare Krisna. Thanks for watching. Bye…
Can I tell you a secret?
Nanu's wearing pink and the rose petals are pink! Bye…
let's hope chamber can I tell you a
secret and the Rosary on a new coat of
paint Benny para Tavia manually head
kisser then we will be getting yogurt
I'll be putting this end yes yogurt and
we are going to put in sugar brown sugar
ok so you have no base minute Kelly
turned upon America's own at all of that
n cardamom powder this is one teaspoon I
mean we are having to processor I've
added all the ingredients in a blender
now let's get blending in a touch of a
button
it's nothing now our case LSE is ready
now window glass
how could you be like it and that's our
kisser ah see now I'm a dude over the
setup Yugi I'm garnishing it with some
kisser on top I love so true get Mangala
Sakai it never emailing me to Rangoon
Seb numbers everything up
don't worry friends freshmen Puri is
ready to get ready for our mango lassi
so we will catch our blender yogurt even
I just a bit of a sugar no yes
and you should be your closest they put
all our ingredients in the blender and
now it's time to blend it in a click of
a button
okay and mango lassi is sweet sweet yes
yes coming with a yellow jello throw
sake just finish let's make it now let's
make trash but that we will be needing
yogurt water salt or yam near zero or a
drunk row skirt is go crying Katya
powdered innocent mint coriander curry
but top or a course calendar the henkka
ph is the other key to key a charge
Helena seen alien we see we hum joy
yogurt oh dear who's fed jitna darling
you Scott double amount of money darling
promise me Danny recipe
coriander tourjournal garnishing Julia
now let's glass sillas this cutting to
local unit Mitch remember to always keep
your fingers as a clock so that in case
your knife slips it doesn't cut your
fingers it hits your nails so that will
protect your fingers inditing okay now
let's class you see the little cross
we'll talk
and there's our chance now we are going
to offer our chance to Taco T and enjoy
all for letting me share email post raw
I see
now we will put the sugar our strawberry
lassi is ready with let's go glassman
economy existed even I was gonna drown
now I'm going to put this with all the
rest of our lives
look amazing wonderful spell but the
most important thing is harikrishna if
you liked this video please subscribe to
our channel and do not forget to hit the
bell icon if you will love to help
contribute to our next project you can
Hare Krishna, I am Radhika and this is Nandu and this is Krishna Priya
Krishna Priya is a bit down in energy today.
Lets…how about lets make her some Laci
-------------------------------------------
How to download fortnite on android! *NOT CLICKBAIT* - Duration: 5:58.
For more infomation >> How to download fortnite on android! *NOT CLICKBAIT* - Duration: 5:58. -------------------------------------------
한국 여행 어땠어?+미공개 영상 HOW WAS YOUR TRIP TO KOREA + undisclosed scene - Duration: 10:09.
For more infomation >> 한국 여행 어땠어?+미공개 영상 HOW WAS YOUR TRIP TO KOREA + undisclosed scene - Duration: 10:09. -------------------------------------------
15 Ways You're Using Tampons Wrong | How To Use A Tampon - Natural Medication - Duration: 6:12.
please subscribe and watch this video
until the end to know the complete
information 15 ways you're using tampons
wrong you think you know all of the
tampon rules but you could be wrong here
the common mistakes people make while
using them and what to do to keep your
vagina free of infection and feeling
good one
you only wash your hands after insertion
washing your hands before you get all up
in there helps prevent contaminating
your tampon on its way to your vagina
says ELISA Dweck MD a Westchester new
york-based gynecologist and co-author of
the complete Hoz for your v2 you don't
unser tampon far enough you'll know
because you'll feel at 8 to shallow
tampon will be super uncomfortable you
may even feel the cotton edge at the
entrance to the vagina dr. Dweck says
you shouldn't sense anything when it's
properly positioned 3 you only use one
absorbency level of tampon although
unlikely tampons can cause toxic shock
syndrome TSS a potentially deadly
disease higher absorbency tampons
increase the risk of TSS according to
the Mayo Clinic so it's smart to use
them only when you absolutely need to
stop a super-heavy flow dr. Dweck says
the amount of blood can change from day
to day throughout your period though
supers might be a godsend on days 1 and
2 of your cycle you'll want to switch to
a regular or light absorbency product
toward the end of the week it's also
worth noting that using a super
absorbent tampon when you have a lighter
flow can dry out your vaginal tissue
says dr. Luna Prasad MD a gynecologist
at New York Presbyterian Weill Cornell
Medical Center in New York City in fact
researchers found that vaginal dryness
was closely linked to women who used
super absorbent tampons according to a
study published in the European Journal
of obstetrics gynecology and
reproductive biology
that dryness can create deers or cracks
in your vaginal walls which increase
your risk of infection she says for you
only change your tampon once a day even
with a light flow you should change that
bad boy every four to eight hours
according to the American College of
Obstetricians and Gynaecologists that's
because a moist tampon makes a warm cozy
home for bacteria and the longer it's in
there the greater your risk of TSS dr.
Dweck says five you use tampons to plug
discharge although it's normal to
experience discharge in the middle of
your cycle you shouldn't need a tampon
at that point stick it in and you could
disrupt the healthy vaginal bacteria
that produce lactic acid says dr. Dweck
reducing the vaginas acidity can allow
harmful bacteria to thrive and cause an
infection like bacterial vaginosis
according to the US Department of Health
and Human Services
if discharge still feels excessive don't
just cork it go to your doctor to get
checked out six you use a tampon the day
after your period ends just in case
because pulling a dry piece of cotton
out of an equally parched vagina can be
more than a little uncomfortable you
should avoid this unnecessary precaution
and pop in a panty liner instead dr.
Dweck says seven you don't change your
tampon after you pee on it from a
medical perspective you don't have to
change your tampon every single time you
relieve yourself dr. Dweck says from a
practical point of view who wants a
soaking wet string hanging out down
there eight you don't change your tampon
after you poop if that string picks up
any bacteria it easily could infect the
urethra dr. Dweck says another thing
moving your bowels can sometimes
dislodge a tampon which could make
leaving it in uncomfortable 9 you forget
to take it out yes this happens IRL if
you develop a horrible odor that can't
otherwise be explained
use a clean finger to feel around for a
tampon if for some reason you can't pull
it out see a doctor
as dr. Dweck 10 you don't change your
tampon after swimming when you take a
dip so does your tampon a string that's
laced with chlorine salt water or lake
water can cause skin irritation if you
don't change it quickly dr. Dweck says
the good news is that normal bacteria
found in a body of water or even a hot
tub likely won't cause an infection
she says 11 you use tampons with torn
wrappers tampon wrappers are designed to
keep out dust dirt and makeup fits that
live at the bottom of your bag or
anywhere else you store them when that
wrapping rips the cotton could pick up
little debris that doesn't belong in
your vagina dr. Dweck says 12 you flush
the applicator unless there's a super
hot plumber you've been dying to call
keep the applicator out of the toilet 13
you throw out tampons because you think
they've expired as long as the packaging
is intact see above old tampons are
perfectly safe to use says dr. Dweck 14
you store them right between your shower
and your toilet the wrapper and tampon
itself will stay fresher longer if you
keep it dry dr. Dweck says 15 you use
scented tampons some women can react to
the fragrance in scented tampons
according to the US Department of Health
and Human Services in the worst case
scenario you might experience irritation
or an urge to itch it's why dr. Dweck
recommends unscented products just in
case
-------------------------------------------
How To Make a Gun??| Minecraft Ideas - Duration: 0:55.
For more infomation >> How To Make a Gun??| Minecraft Ideas - Duration: 0:55. -------------------------------------------
How to simplify interview scheduling with Dynamics 365 for Talent - Duration: 2:13.
[music]
>> Streamline the interview
process and eliminate scheduling hassle for
both your hiring team and your candidates.
Scheduling interviews can be a time-consuming process.
Manually searching through calendars to find
a time that works for several members of a team.
Microsoft Dynamics 365 for Talent integrates
seamlessly with Office 365 to help simplify scheduling,
reducing your time to hire and
providing a better candidate experience.
Start by deciding on the interview
dates you'd like to suggest to the candidate.
Simply share these via the candidate portal.
Candidates receive your request,
and with just a few easy clicks,
share their date preference
so you can begin scheduling interviews.
Choose from several options to
meet your specific interview needs.
Meet with the candidate one-on-one or as a group.
You can have members of
the interview team meet in a specific order,
and include Skype details for
any team members who will be joining remotely.
Dynamics 365 for Talent with the power of Office 365
automatically identifies the best time for
everyone in the hiring team to meet with the candidate.
You can now schedule the candidate with
confidence knowing your interview time works for all.
Accelerate interview scheduling so
you can reduce your time to hire,
and quickly build a high performance team.
[music]
-------------------------------------------
How to create a Multi-Displacement map in the CoronaLayeredMtl? - Duration: 7:54.
Hello! With you - Krivulya Andrew Charly and in this tutorial I'll talk about -
How to create a multi-displacement in CoronaLayeredMtl?
After the release of this art - people very often ask this question.
Because in this MakingOf - I used a complex displacement in the Corona Renderer.
So I decided to show an interesting algorithm
with which you can create a complex displacement, when you will understand it =)
Corona doesn't have its DisplacementMix map - as in the same Octane or Redshift.
But it can be created with the help of certain nodes.
So, open 3dsmax. Create a plane = 10 by 10 meters.
Next create a Corona Sun in any direction - because now it's position doesn't matter.
Inside Corona Sun settings - activate the sky and assign the usual Displace modifier on the plane .
Since it's easiest to get the desired result with it from the same World Creator, etc.
In the plane settings - set 10 segments in both directions.
and Render Density = 3 for the beginning
For Displace - choose a standard Noise map...
Turn on a Corona Interactive to immediately see the result.
and a little more experiment with a Density value.
I think 10 - it will be quite enough for this tutorial.
You probably noticed that when you turn on Corona Interactive - the grid density in Viewport
has changed since the Density parameter works only during rendering.
For example, if you set the value to 20 - we will see how it became even denser.
But if you turn off the interactive ...
Density will return to the original value without rendering.
This is very convenient for optimizing you work.
Let's adjust the displacement map a little.
Noise Type = Turbulence.
The size is bigger and customize the rest of the parameters at your discretion.
Now go to the most interesting - Creation of Corona Layered Mtl with Multi-Displacement.
Which will work perfectly with the Displace modifier assigned to the plane.
So, create CoronaLayeredMtl.
Then, three conventional materials CoronaMtl, which connect with it.
The first layer will be responsible for multi-displacement,
so its color isn't changed, but for the next two - set such shades.
I always raise higher the first layer, - so that it doesn't distract and it was convenient to work with it.
Let's enable Interactive and assign this material.
As you can see - the object have only one color.
I suggest don't mixing through the map that is located
in the Displace modifier, we will use the Falloff map.
Because if you use the same map with Displace - we will get an unsatisfactory result.
Let's assign this map, to make sure of this.
Assign it to the mask2 slot - and see, that there is still no mixing.
Thanks to the map of FallOff - we can make a mixing in height and get the result what we need.
A little later - I will also show an example with a Checker map and why it isn't worth making a mix with
the same map which we use in the Displace modifier.
And now - let's create a FallOff map ...
Load it into the Mask2 slot and change some of its settings.
To mix by height - you should change the fallof type - to a "distance blend"
and the axis which named falloff direction change to a Local Z Axis
On the render - you will see how the colors mixed properly.
Change their places and adjust the Distance.
Move a little closer to the object to see better the result of mixing.
I specifically picked up a green color slightly higher to show the difference between the noise maps,
which we will use for MultiDisplacement.
Now on the area with green color - you should assign a small displacement,
and on the area with the brown one - the larger one.
And, with all these machinations - we should not
to lose the main displacement in the Displace modifier.
In the Slate Editor - climb higher to our material for the future MultiDisplacement,
And create the 1st CoronaMix ...
With Add mode.
Then copy this node twice with Shift.
Add the received nodes to the main one, and to mix them we use the same Falloff map.
Next, create two Noise maps and add them to the Top of each CoronaMix.
And now let's learn how to manage the height of extrusion of each layer.
For example, I want to extrude the green layer by 4cm.
In the material settings - set Max Displacement is equal to this value.
But this is not enough to get the desired result.
First - we need to configure the size of each Noise
and in the Bottom-layer of each of CoronaMix nodes - add a Color map for controlling the Displacement height.
So, in the second Color map set Advanced Output Multiplier = 0
Next, adjust the size of each of the noise maps.
For the first, Size = 10cm, and for the second - 0.5cm.
Just want to say that if your Displacement Mix doesn't work -
You should set a Mix mode in the main CoronaMix, instead of Add.
In most cases - this mode works better, but sometimes Add also copes with this task.
As you can see, in this case - Mix mode gives a more correct result.
In the green area - a small value of Noise.
In brown - large.
Then, simply by changing the settings of both Color node - you can change the extrusion force.
So - we have learned a multi-displacement mix creation.
The use of which is very important.
For example, if you use the Displace modifier and the Height map from World Creator.
How I did it - in one of making of on the channel.
And in the material itself - want to mix several Displacement maps from Megascans or Poliigon textures.
And, on each layer - get your version of extrusion.
The only difference is that if you use a map from World Creator -
Then it will need to be mixed with the main Falloff.
But I will show this in other lessons.
I also want to express the gratitude to the Corona Renderer Support.
Especially to Marcin Miodek, who helped me to understand this topic.
By the way, the peculiarity of this method is that during the change of Far Distance to Falloff map -
you can mix a layer with the same grass and get a more realistic transition from
from grass to mountains or other objects.
At the same time - the all displacement settings for each layer are saved and everything works as it should.
Also, as promised - I will show one more example with a checker, so you understand why I
use the Falloff map, but not the main one map from the Displace modifier.
So, in the example with Checker - I will delete the Displace modifier and show the usage variant
of Multi-displacement without it.
Also in the plane itself - remove Density, because in this case - it is not necessary.
And Tile for Checker = 2 * 2
So, if you use the same Checker map instead of Falloff for mixing materials -
That you will receive is such a result.
Even if you try to remove the Blur Offset - you will get Displacement with incomprehensible bugs.
So, to make a more correct mixing of the material in this kind of displacement -
it's better to use Falloff too.
Assign it instead of Checker and get the desired result.
That's all I wanted to tell in this topic.
With you was - Krivulya Andrew Charly
Press the "thumb up" - if you liked this video.
Subscribe to the channel to avoid skip new releases.
And also, turn the bell next to the subscription - for notifications.
And of course - share this tutorial via the "share" button
Peace for everyone!
-------------------------------------------
How to make load sd card for MP314/MP313/STRADA car radio \ Пишем карту для MP314 - Duration: 3:49.
Hello everyone,
Today we'll show you how to make
a load SD card for MP314
with Card Master Pro programmer
the car radio asks us for SDHC card
as a first step, we have to start our SCM app
Then we are downloading our required image
from a web server. You need to click the "Скачать" button
It will start download, the Will file be in zip format.
i'll stop downloading because i already have it
Then unzip the downloaded file
Now we need to insert our card to any SDHC adapter
Then with WinHex program (launch it with an admin rights)
Click "clone the disk" button
In this window, we are selecting our file which we've unziped before
Then select our SDHC card from the list and press "OK"
"Sector to begin with" - 0, then press "OK"
again press "OK"
after that WinHex will start writing image
i've stopped the proccess because my card is already written
I want to show you that card is not working yet
and car radio says us that its invalid card
insert that card to our SCM PRO prog
Then press "SDHC write data" Button
Choose "MP314" and press "Write"
Done.
Now insert the card in the Car Radio slot and reset it
As we can see car radio starts working with our card
With all functions and options
-------------------------------------------
How to do affiliate marketing 2018 - How to make money with affiliate marketing 2018 (100% free) - Duration: 0:32.
For more infomation >> How to do affiliate marketing 2018 - How to make money with affiliate marketing 2018 (100% free) - Duration: 0:32. -------------------------------------------
How should I select the right lawyer? | Indianapolis Personal Injury Attorneys - Duration: 0:59.
Well first of all selecting the right
lawyer is very subjective to be honest
with you and a lot is also based upon
chemistry that's why in my view it's
very important for the prospective
client to meet with the attorney
directly face-to-face. The other thing
that one should consider before hiring a
personal injury lawyer is what is their
general reputation with regard to
integrity are they known for having a
client's first office and by that I mean
do they take action on behalf of their
client that's in the clients best
interest or is it in the lawyers best
interest. At Sevenish law firm we are known to
be a client's first office we make zero
decisions that place the attorneys
interests before the clients that's how
we do it here!
-------------------------------------------
How to make Jalebi recipe | Street Food Amazing Funnel Sugar Cake | BD Daily - Duration: 3:53.
Street Food Amazing Funnel Sugar Cake Jalebi recipe
-------------------------------------------
Column Construction | How to Rendering Sand and Cement on concrete or column - Duration: 12:53.
Column Construction | How to Rendering Sand and Cement on concrete or column
-------------------------------------------
[CODE] How to get 1500 BUCKS New UPDATE | Roblox Island Royale - Duration: 1:06.
You Need To Redeem A Code To Get 1500 Free Bucks.
The Code Is BLOOD
-------------------------------------------
How to make the transition "Luma Fade" - Sony vegas 2018 TUTORIAL - Duration: 1:03.
For more infomation >> How to make the transition "Luma Fade" - Sony vegas 2018 TUTORIAL - Duration: 1:03. -------------------------------------------
Barbara Palvin in How to Get the Perfect Shot 📸 [Sport Illustrated Swimsuit 2018] - Duration: 1:06.
I think it's very important to know who you are working with
and to know your angles to make everyone's job easier.
Yeah , yeah. Love that.
if I know that we're shooting a closeup I'm not gonna run out
so that's why I like the fact that they tell me which lens they're using
and then I can just work on that part of my body
Really make an effort to learn all these techniques and work like maybe standing in front of the mirror
And try different poses what works on your body and like different expression
because it's really going to help your work and make your job easier.
The sexiest thing you can own is your confidence.
Yes, you really have to learn that.
-------------------------------------------
Basic English Grammar - How To Form and Use the Verb To Be. - Duration: 7:35.
Basic English Grammar - How To Form and Use the Verb To Be
-------------------------------------------
[ENG sub] How to draw an eye | (feat. wanna one) #羊毛フェルト - Duration: 3:31.
What up guys!
Welcome back to my channel
Today I'm gonna tell you about something a new series
It's a painting with wool
Here is my plan to draw a special person
Not an animal or a character
but "CELEBRITIES!!"
Yes, it's called a fan art
I'm worried if I'll do well...
Now I'll try.
Let's just do it
My choice I made for practice is
the EYE of Park Ji-hoon, a member of WANNA ONE, K-pop idol group
Because it is very beautiful
Lets get started!
Outline with brown wool
wow, looks like a dolphin, doesn't it?
Well.....something's wrong
this eye looks so sad
but I'll just go ahead
Hm....
I added too much white wool
I'll retouch with dark gray wool
paint only part of eye with light blue colored wool
too much again : (
I'm gonna make it larger a little bit
After giving an eye a highlight of the white wool
It became pretty, right?
Paint bags under the eye apricot
He has thick double eyelid
After painting with light pink wool like eye shadow
his eye gets more realistic
some details around the eye
next, I'll draw a black eye line
and eyelash
Completed!
Coming up next, I'm going to challenge everybody else
Please look forward to it!
See you soon. Bye~!
-------------------------------------------
Princess of Veils? How the Late Princess Diana Could Have Been Seen in a Burqa on Middle East Tour - Duration: 3:02.
A sketch of a burqa-style dress for Princess Diana to wear when she visited the Gulf States in the mid-1980s has emerged
The sketch was created by one of her design teams, David and Elizabeth Emanuel, in preparation for the official tour that included Saudi Arabia alongside husband Prince Charles in 1986
But it was never shown to the princess – and the dress was never made, Elizabeth tells PEOPLE
"It was not included in the final bundle we presented to her, as by then we had a better idea of what was needed," Elizabeth, who helped design Diana's wedding gown in 1981, adds
Today is the 21st anniversary of the princess's sudden death following a car crash in Paris
The 1986 sketch — marked "reserve outfit" and showing the burqa complete with a very '80s, very Diana, bow on the side — is now for sale, along with notes and other sketches that have been provided by a private collector
The set is expected to fetch up to $30,000 at auction next month. RR Auctions in Boston is handling the sale
An outline of the commission is included in the sale from Diana's lady-in-waiting Anne Beckwith-Smith says, "Certain special requirements concerning dress need to be observed and I am writing to ask if it would be possible to submit to The Princess of Wales a few sketches for day and evening wear from which Her Royal Highness could select items for this tour
" She adds, "Their Royal Highnesses will be visiting Oman, Qatar, Bahrain and Saudi Arabia … In all cases modesty is the order of the day
" Also included are copies of the Emanuel invoices, which describe the dresses in detail
"Princess Diana tried to conform to local customs by wearing concealing clothes, but still exposed her neck and left her head uncovered — notably, she did not have to wear the 'Reserve Outfit' burqa depicted in this archive," RR Auctions says
"At evening banquets, she appeared in the long-sleeved demure dresses made especially for the tour
A remarkable, comprehensive archive from the famously stylish royal." Elizabeth, who has her own line, Emanuel Mayfair, adds, "The sketch was done when we first had the commission
We had never made anything for the Middle East before and didn't know what the customs were
" She is surprised that it has come up for sale. "I don't know where this has come from – it was all such a long time ago
"
-------------------------------------------
How differential works | (English sub) | Science and Tech Tamil - Duration: 4:08.
Welcome to science and tech tamil
When we travel in a vehicle, there will many turning points.
To turn a vehicle, right and left wheels should turn in different speed.
For example, if the vehicle turns in right side, right side wheel will rotate lesser than left wheel.
These both side wheel rotational speed variation is very low.
But both wheels are connected with single solid shaft,
and then one side wheel get more traction than other wheel.
This will lead to fall down the vehicle.
In front wheel steering is connected,
so that they will rotate independently.
But back wheels are connected with engine shaft
and acting as driven wheel.
To rotate both side wheels in different speed at turning,
differential is used.
It is located at centre of shaft.
Let see some basic parts of differential.
They are; pinion gear,
ring gear, spider gear
and right and left side gear.
Let see structure and working principle of differential.
Right and left wheel shafts are separated.
This shaft corner is a side gear.
These both side gears are meshed with spider gear.
The spider gear is located 90 degree to the pinion gear.
The spider gear is fixed with ring gear to rotate with ring gear.
The ring gear fixed with one of the wheel shaft.
This ring gear meshed with pinion gear which is fixed with drive shaft.
The pinion gear is transfer engine rotational motion
to ring gear and the ring gear transfers
rotational motion to drive wheels through spider gear.
The spider gear rotates with ring gear and also rotates its own axis.
The spider gear rotates with ring gear
while vehicle move on straight path.
When vehicle turns in right or left direction,
one side rotation of the wheel will decrease.
To equalise this different rotational motion,
the spider gear will rotate its own axis as well as rotate with ring gear.
Due to spider gear reaction,
both right and left wheels can rotate independently.
For four wheel drive vehicles,
front wheels also have differential.
The structure of differential which we have seen in video
belongs to standard differential type.
There is a disadvantage in standard differential which is that
after turning the vehicle, the vehicle starts move straight path
at the time one side wheel may got good traction
and other side wheel may got slippery as a result,
vehicle smooth movement will affect.
To avoid one side slippery,
limited slips differential
and locking type differential will used.
We will see about them in separate video.
If you have interested, please support us on patreon.
Thank you!
Không có nhận xét nào:
Đăng nhận xét