Google subtitles
- hello everyone, I'm Paulo Costa
welcome to my channel my bench
today I'll show you how I made this table in pine
to put the tv and video game console
This was another project I drew.
if you want to acquire the plans and measures I will leave the links in the description
I will use 10 cm paired pine boards
I started by cutting all the pieces of wood according to the plans
This new cutting bench is very useful.
If you want to see this project I will leave the link above
some of the pieces had to be glued together, and then cut to size
the glue I always use in this type of gluing
is the UHU wood glue
it is a strong glue, it is quick to dry
and becomes transparent after gluing
here I collected 3 sets
and tightened tightly with the clamps
in order to dry in my bench saw, I prepared my last pieces
which are to the sides of the table
joined the pieces to cut,
to be all with the same measure
now I'm going to make the side support and the center bracket
the construction process is the same in the 3 parts
I started by marking the holes
I'll make the holes with my jig of slanted holes
now I'll put the pieces together with glue
and tighten well with a clamp, before screwing
the holes will always be made under the table
so that they do not show up
after making the sides and the centerpiece of the table
I'll make two supports to fix the middle shelf
I will fix this holder 12 cm from the bottom
I'm going to fix the side bracket
on this stand I will fix the table top
I fixed it to the width of the table, so that the table top is facing the side
I confirmed the measurements on both sides and I will fix the top
I always use glue to piece together
and tightened with a clamp, so the parts fit together
then tighten with screws
This project is supported by Cin inks and UHU glues.
I really liked this project and the previous project, the contemporary chairs
I designed these two projects.
if you want to get the projects and measures I will leave the links in the description
take the opportunity to subscribe to the channel
f you like the project, leave it like
very important leave your comment
in the comment I feel the connection with my subscribers
let's continue with the project
I made the mark on the first board to make the cut
to the table face and with a perfect fit
then I made the cut with my saw
this piece fit perfectly
then put the other boards and fix underneath
this piece will support the center of the shelf
I'll put this piece to look good aesthetically.
to keep the same width around the table
here with sawdust and glue I created a bitumen to cover some larger crack
after drying I passed the sandpaper 120 across the table
and in the end I passed a sandpaper 180
now the final part has arrived, painting
as this table is to stay in the same space of the chairs I will keep the same color
I'll apply the woodtec lac varnish
Movidur Super, is a watery and transparent varnish
for me it has the advantage of being here
as my garage is closed, I have no problems with the smells of paints
has an easy application
I passed two of hand, and between hand I passed a sandpaper 180
as you can see it is getting spectacular
and we come to the end of yet another project
in my opinion it was very good
but leave your opinion in the comments
if they wish to support this project and the design of the
I'll leave the link in the description to contribute
if they can not contribute
help in sharing the videos on your social networks, and how your friends
a big hug, until the next video
Không có nhận xét nào:
Đăng nhận xét